Technical Information
Chemical base : Acrylic
Appearance : Semidry snow white paste
Drying time : 5 6 hrs @ 30 °C
Full curing time : 7 days at 30 °C
Specific gravity : 0.26 ± 0.02
Density : 260 g / ltr
Application : Putty knife, Patra
Adhesion : Go od on plastered surface
Coverage : 30-35 running meter / ltr
(For a length of 1 meter, and depth and width of 10 mm)
Packing
1 kg
Areas of Application
Internal & external plastered brick masonry wall cracks of upto 10 mm width.
Method of Application
Surface must be free from dust, oil, grease, and loose particles etc. Moisten the
surface before applying DR. FIXIT Crack-X Shrinkfree.
Fine hair line cracks must be widened up to 1 mm minimum and then filled.
For filling DR. FIXIT Crack-X Shrinkfree on the internal surface, existing POP or
painter's putty must be removed till plaster surface is exposed.
Press DR. FIXIT Crack-X Shrinkfree firmly into the crack ONE TIME ONLY with a
spatula or putty knifes and level with the surface.
Care must be taken to avoid formation of cavities or bubbles during application.
Allow it to dry in ambient conditions for 5-6 hrs.
Further POP or painter's putty application can be taken up once it is fully dry.
For best results allow DR. FIXIT Crack-X Shrinkfree to cure for 7 days.
Precautions & Limitations
- Not for cracks in POP or painter's putty
- External application must be over coated with paint
- Jet or Power washing on walls not advisable prior to application.
- For application below 10oC, drying time will be delayed
- Container to be tightly closed after application
- In case of filler compound too dry, add 1 teaspoon of potable water to 250 ml of
- Dr . Fixit Crack X Shrinkfree
- Clean tools and hands with soap and warm water
- Not as a skim coat
- Can not be tinted
|
 Download |
|
