Technical Information
Appearance
|
: |
Grey colour viscous liquid |
| Mix proportion |
: |
1 : 0.87 (Base : Hardener) |
| Specific Gravity |
: |
1.01 ± 0.02 |
| Pot Life |
: |
1 hour at 30oC |
| Coverage |
: |
2 - 3 sq mtr / kg depending on the substrate |
| Shelf life |
: |
12 months in unopened condition and if stored properly in a dry and cool place |
| Flexural Strength |
: |
350 kg per Sq.cm sq. at 7 days |
| Tensile Strength |
: |
200 kg per Sq.cm sq. at 7 days |
| Shear Strength |
: |
200 kg per cm sq.cm |
| Application Temp. |
: |
15oC to 35oC |
Packing 1 kg, 2 kg & 9 kg
Areas of Application
- As a bonding agent for bonding old to new concrete / mortar
- To extend or repair structural concrete
- Can be used as a bonding agent of glazed brick, tiles, steel & structural members
Method of Application
The surface for application must cleaned and made free from dirt, grease, oil, and loose particles before application of Dr. Fixit
Epoxy Bonding Agent. Any laitance etc. must be thoroughly removed by mechanical means
Mixing & Application
- The hardener part should be poured totally into the base. The two parts must be thoroughly mixed with a low speed mixer
(150 to 200 rpm for about 3 to 4 minutes) to get uniform colour of the mixed material. Mixed material should be brushed
applied on the prepared surface.
- Overlay of concrete / mortar has to be placed on Dr. Fixit Epoxy Bonding Agent when it is tacky. If Dr. Fixit Epoxy Bonding
Agent has dried, apply a 2nd coat before placing the concrete / mortar.
Precautions & Limitations
- Dr. Fixit Epoxy Bonding Agent should be applied with gloves and avoid contact with skin or eyes.
- Any splashes into the eyes or skin have to be immediately washed only with clean water and medical advice should be taken.
|
 Download |
|
