Fixing Tiles with Dr.Fixit Fevimate TG - ( Surface preparation )

Once the leveling screed (PCC) is laid in wet areas, it shall be cured for a minimum 7 days. Remove all water & clean surface to receive the tile adhesive

Filling Tile Joints - ( Surface Preparation )

The tilling joint should be made clean, dry and free from all contamination

Fixing Tiles with Dr Fixit Fevimate TG

Dr Fixit Fevimate XL is mixed with potable water at the proportion of 3:1 (Powder : water) with trowel / slow speed drill (50-100 rpm) until a homogenous lump free paste is obtained. Care should be taken that the quantity, which can be consumed within 2hrs at 30°C, should only be mixed. Adhesive is then spread to a thickness of approx, 3-6 mm and comb with a notched trowel. The tiles are placed on the surface to be tiled and tapped properly for ensuring complete coverage of the backside of tiles without any air voids. The joints between two-tiles is kept with the 2mm spacers provided with Dr. Fixit Fevimate XL bag. The tiling is allowed to set for 24 hours before application of waterproof tile grout Dr Fixit Fevimate TG

Filling Tile Joints

Dr Fixit Fevimate TG a cementitious based tile grout is mixed with water in ratio of 2.5:1 (Fevimate TG : Water) until a homogenous and desired consistency is achieved. The prepared paste is then filled into the gaps and excess material is removed by tooling.